Suzuki grand vitara

Wheel spacer adapters size. Stud Size: M12x1.25, spacer nuts will be provided. Mm, will fit any CB size below. Includes Studs and Nuts. Including spacer nuts same as the stud size, Nuts we provide will sit below the surface of the spacer, keeping the wheel flat on the spacer. We will try our best to assist you in finding the relevant information. Please let us know your car brand, model, year, we can provide you related data and information for you to refer to. Before purchasing any wheel spacers please measure the gap between the outer edge of the tyre and the wheel arch. Take 5mm from this figure to help give the maximum thickness wheel spacer suitable for your vehicle. It is good practice to work to 5cm less than this figure to allow for movement in the vehicle suspension. When measuring your wheel gap always measure both the driver and passenger sides on the same axle as measurments may differ slightly and you should always work off the smaller of the two figures. PCD stands for’Pitch Circle Diameter’and is usually expressed in millimeters, (inches may also be used). For a 4 or 6 bolt fitment this measurment is the distance between the centre of two diametrically opposite bolt holes. For 5 bolt fitments measuring the diameter of an imaginary circle running through the centre of each bolt hole. The offset of a vehicle’s wheels is the distance between the centerline of the wheel and the plane of the hub-mounting surface. This is typically expressed in millimetres and can be either positive / negative. The offset plays a significant role in the vehicle’s suspension geometry as well as dictating the distance between the tyre and suspension. Not to mention the visual gap between the wheel and the vehicle bodywork. The stud / bolt pattern refers to the number of studs, (or lugs) the wheel bolts onto, and the imaginary circle the studs form. Most vehicles have either 4, 5 or 6 bolt patterns. The centre bore (or hub diameter) of a rim refers to the size of the centre hole in the middle of the wheel. This correlates to the diameter of the hub centre bore and is usually expressed in millimetres. Hub centric refers to the the the point at which the primary load of the vehicle is placed. Hub centric wheel spacers ensure less load is placed on wheel bearings and other suspension components by keeping this load on the vehicle hub. The alternative is to us’lug centric’spacers which rely on the wheel studs to centre the wheel on the hub. Good practice for fitting spacers of thicknesses greater than 10mm is to use hub centric wheel spacers. GMC PLEASE REFER TO CHEVROLET. TRACKER 2&4 DOOR 89-on. L’item « 4pcs 25mm 5×139.7 M12x1.25 108mm Elargisseurs de voie pour Suzuki Grand Vitara » est en vente depuis le mercredi 17 juillet 2019. Il est dans la catégorie « Auto, moto – pièces, accessoires\Auto\ pneus, jantes\Elargisseurs de voie ». Le vendeur est « primecooling_eu » et est localisé à/en Fradley, Lichfield. Cet article peut être expédié au pays suivant: France.

• Garantie fabricant: 2 ans
• Taille: 25mm
• Numéro de pièce fabricant: Non applicable
• Marque: primecooling_eu
• Bolt Patter: 5X139.7 to 5X139.7
• Thread Pitch: M12x1.25
• Widening per wheel: 25mm
• Hub bore: 108mm
• Compatible vehicles 1: FOR CHEVROLET TRACKER 1998-2008
• Compatible vehicles 2: FOR SUZUKI SAMURAI/X-90/XL-7/VITARA/GRAND VITARA